Reference Information
10-14Samsung Electronics
■
Oil Collection during Cooling Operation
1. This is an operation mode to recollect compressor oil that moved to pipe or indoor unit after mixing with refrigerant during
operation.
2. Use the K2 Key
3. Automatic operation by the basic setting time during cooling operation
4. Use the key mode if required
The number of pressing Display
7 times 7 times:
Sub3 Sub2 Sub1 Main
- Operation setup Key and Display (in outdoor unit)
Display Key
K1 K2 K3 K4
10-3-2 Oil Collection Operation
To Next Page
Loading...