Samsung S1050 - Page 108

108
Ⅲ.ADJUSTMENT
11)BURNING TEST
BURNING TEST : After changing the MAIN PCB and parts, check whether all of the camera functions work
correctly.
CCD DEFECT CELL : After changing the MAIN PCB and CCD, adjust the DEFECT CELL of CCD.
a...Download program and save it to SD memory card.
b...Insert the SD memory card that has the program file and turn on the cameran
c...The function will be done in order automatically
※ After completing the functions, "Burning END" message will display and the camera turn off automatically.
<Description of TXT file>
When modify the program, use the Memo Pad of Windows and save it as "STS3105ADJ.txt"
Use only section related to each adjustment.
//////////////////////////////////////////////////////////
//PROJECT:STS3-105
//PROCESS:Backlash/Burnin/DefectivePixel
//DATE:2007.02.15
/////////////////////////////////////////////////////////


//================================#0.adjcontrolsetting

adj_controlcheck_process_id65532
adj_controlset_process_id65528
adj_controlsave_e2prom1
adj_controlsave_data_file1
adj_controlrePeat_CNT30
adj_controloverride_tv_usb1
adj_controldo_check_process_id1//

//================================#1.Backlash

modeprogram