Samsung S1050 - Setup 2 ( ); Initialisation; Selecting a battery type; E (Effect) button

39
Ⅲ.ADJUSTMENT
3) Upgrading
1. Insert the SD card that has the firmware and turn on the camera.
2. Use the AC adapter or fully charged battery.
To upgrade the Firmware, all of the battery level indicator on the LCD monitor must be displayed.
* Updating the firmware will delete all data in the SD card.
Be sure to download all data to your PC before updating the firmware.
The firmware file name must be " STS3105.ELF "
3. Turn on the camera.