Samsung S1050 - Metering; You can change the metering method to take brighter pictures.; Continuous shot; You can select continuous shot, and AEB (Auto Exposure Bracketing).

48
Ⅲ.ADJUSTMENT
2. ADJUSTMENT CAUTION
1) Basic Information of Adjustment
After changing the electronic parts of S1050, the parts have to be adjusted in accordance withe the adjusted items.
The items listed on the table are have to be adjusted after changing.
1> To adjust the camera after changing the electronic parts, see the below table.
2> Equipment
▶ Equipments
- AE TESTER : AE TESET can test up to LV 16.7.
- POWER SUPPLY : 3.3V / 2A
▶ Chart
- Focus Chart
- Gray Chart(18%..Reflection Paper)
MAIN POWER BARREL CCD
PCB PCB ASS’Y ASS’Y
FIRMWARE UPGRADE ●●
PUNT ADJ. ●●●
SHUTTER CLOSE TIME ADJ. ●●●
BACK LASH ADJ. ●●●
FLASH ADJ. ●●
BATTERY LEVEL ADJ. ●●
OB SETTING ●●
BURNING TEST & CCD DEFECT CELL ●●●●
EEPROM READ
EEPROM WRITE