Samsung S1050 - Special Effect (E button): FUN; Changing a part of composite shot before taking the last shot; Changing a part of composite shot after taking the last shot

《43》
● Changing a part of composite shot after taking the last shot
1. After taking the last shot , a cursor to select a frame will display. Press the Up /
Down / Left / Right button to select the frame.
2. Press the + / - button and an image will be deleted. Composite frame will be
activated.
3. Press the Shutter button. You can take other images again by using the Up /
Down / Left / Right button and + / - button.
4. Press the OK button again to save the captured image.
Pressing the
Up button
Pressing the
OK button
Pressing the
+ / - button
[ After taking the 4th shot ]
6
[ Moving backward to the 2nd shot ]
6
[ After taking the 2nd shot again ]
6
[Deleting the 2nd shot]
6
[ The final picture ]
100-0031
Pressing the
Shutter button
OK +/-
Capture Delete
SH +/-
Save Delete
OK +/-
SaveSave Delete Delete
OK +/-
Special Effect (E button) : FUN
● Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite shot.
1. Pressing the + / - button.
2. A previous image will be deleted and new frame will display.
If there is an image taken before, press the + / - button again and a previous
image will be deleted again.
3. Press the shutter button to capture a new image.
[ Before taking the 3rd shot ]
6
[ Moving backward to the 2nd shot ]
6
Pressing the + / -
button
Capture Delete
SH +/- SH +/-
Capture Delete