Samsung S1050 - Starting PC mode; Connecting the camera to a PC; Disconnecting the camera and PC; Downloading stored images

《89》
■ Connecting the camera to a PC
■ Disconnecting the camera and PC : Refer to page 89 (Removing the removable
disk).
※If you selected [Printer] in Step 5, when you connect the camera to your
computer, the [Connecting Printer] message will display and the connection
will not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 2 and onward.
Starting PC mode
■ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk → DCIM → 100SSCAM].
The image files will then be displayed.
5. Click a folder where you want to paste the file.