Samsung S22A350H - Page 28

4-13
4. Troubleshooting
2. Press the - button to change the setting to On or Off.
When replacing the panel 
After replacing the panel, move to the Panel item and hold down the Menu button for ve (5) seconds.
The Ch. No is incremented by 1 and then both the On Time and Cycle are set to 0.
Monitor On Time : 13 Hr
Panel Ch. No. : 0
On Time : 13 Hr
Cycle : 957
Auto Auto : On
Pixelshift : On
Country : English
HotPlug Time : 9
Scaler-MCU : Novatek NT68779
Version : m-S327H0GOA-0800.1
Checksun : 4C97
Service Function
PixeShift
Monitor On Time : 13 Hr
Panel Ch. No. : 0
On Time : 13 Hr
Cycle : 957
Auto Auto : On
Pixelshift : Off
Country : English
HotPlug Time : 9
Scaler-MCU : Novatek NT68779
Version : m-S327H0GOA-0800.1
Checksun : 4C97
Service Function
PixeShift
Monitor On Time : 13 Hr
Panel Ch. No. : 0
On Time : 13 Hr
Cycle : 957
Auto Auto : On
Pixelshift : Off
Country : English
HotPlug Time : 9
Scaler-MCU : Novatek NT68779
Version : m-S327H0GOA-0800.1
Checksun : 4C97
Service Function
Panel Ch. No.
This number is incremented by 1.