5-3. Connector Functions
Connector Functions
CN600 Supplies 14V from the adapter to the main board and transmits the PWM output from the
main board to the LED driver.
*When a problem occurs: The No Power and Blank Screen errors may occur.
CN902 Transmits the lamp current (60mA ~ 70mA) generated in the inverter to the lamp of the panel.
* When a problem occurs: The Blank Screen error may occur.
CN402 Connects the function board.
* When a problem occurs: The No LED screen and Function failure errors may occur.
CN100 VGA signal input terminal.
* When a problem occurs: The No RGB output error may occur.
CN400 Transmits the LVDS signals from the main board to the panel.
* When a problem occurs: The Blank screen and No Power errors may occur.
5-4. Cables
Use LVDS 30P FFC cable
Code
BN96-13722P (S27A350H) BN96-13722X (S22A350H)
BN96-13722S (S24A350H)
BN96-13227V (S23A350H)
Photo
To Next Page
Loading...
