5-3. Connector Functions
Connector Functions
CN101 CN600
Supplies 5V from the power board to the main board and transmits the PWM output from the
power board to the inverter.
*When a problem occurs: The No Power and Blank Screen errors may occur.
CN1 ~ CN4 In Transmits the lamp current (110mA ~ 112mA) generated in the inverter to the lamp of the
panel.
* When a problem occurs: The Blank Screen error may occur.
CN102 Transmits the input power of 90 to 263V to the power board.
* When a problem occurs: The No Power error may occur.
CN101 Connects to the function board.
* When a problem occurs: The No LED screen and Function failure errors may occur.
CN102 VGA signal input terminal
* When a problem occurs: The No RGB output error may occur.
CN400 Transmits the LVDS signals from the main board to the panel.
* When a problem occurs: The Blank screen and No Power errors may occur.
To Previous Page
Loading...
