20
Tidying Up the Connected Cables
Connect the corresponding cables. Pull the right side of the HOLDER-STAND
CABLE to remove from the stand. The left side
of the HOLDER-STAND CABLE can be damaged
when pulled forcibly.
Put both cables in the cable holder on the
stand (HOLDER-STAND CABLE) to organize the
cables, as shown in the figure.
Assembly is complete.
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
Select a language on information message and change the resolution on your PC to the optimum
setting.
―
If the optimum resolution is not selected, the message will appear up to three times for a specified time
even when the product is turned off and on again.
―
If you want to set the optimum resolution for your computer. Please refer to (Q&A) → “How can I change the
resolution?”
To Next Page
Loading...
