- 21 -
Power button / Remote control sensor / Controller button
● Press button: Display the Control menu. Select or run a focused item on the menu.
● Press and hold button: The running function is terminated.
" This function may not be supported depending on the model.
● Up/Down button: Changes the channel.
" This function may not be supported depending on the model.
● Left/Right button: Changes the volume.
" This function may not be supported depending on the model.
" The buttons may work differently depending on the situation.
Sound sensor
You can turn on or off the sound sensor by using its button at the bottom of the product.
With the product on, you can push the button to the left (or backward) to turn on the sound sensor or to the right (or
forward) to turn off it.
See the pop-up window on the product to check whether the sound sensor is turned on or off.
● The position and shape of the sound sensor may differ depending on the model.
● During analysis using data from the sound sensor, the data is not saved.
Power indicator
● The LED turns on when the product is turned off.
● The LED blinks when the product enters the standby mode.
" When 60 seconds elapses with no signal, the product enters the standby mode. In standby mode, the screen turns on
again when any signal is input or any button is pressed on the remote control.
● The colour and shape of parts may differ from what is shown.
● The screen may dim if the protective film on the SAMSUNG logo or the bottom of the product is not detached.
Please remove the protective film.
● When using the buttons (excluding Power) on the Samsung Smart Remote, the receiver LED does not blink.
To Next Page
Loading...
