25
Preparations
1
1 Preparations
1.3.2 Removing the Stand
Disassembly is the reverse order of assembly.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Place a soft cloth over the table to protect the product and place
the product onto the cloth so that the front of the product faces
downwards.
While holding the top of the monitor with one hand, grasp and
detach the stand with the other hand.
Remove the headphone holder.
Turn the connecting screw at the bottom of the stand base to
separate it.
Remove the stand neck from the stand base by pulling it in the
direction of the arrow as shown in the figure.
To Next Page
Loading...
