45
Using the OSD Menu on S24C230BL and
S27C230B
3
3 Using the OSD Menu on S24C230BL and S27C230B
3.9 Source
Using this menu, you can change the input signal (Analog/DVI).
If the monitor is in power saving mode or is displaying the message Check Signal Cable, press
[ ] to display the OSD.In this OSD press [ ] and [ ] to change the input signal
(Analog/DVI).
3.9.1 Configuring Souce
1 Press [ ] on the product.
2 Press [ ] to move to Source and press [ ] on the product.
The following screen will appear.
3 Press [ ] to move to the Source you want and press [ ].
4 The selected option will be applied.
To Next Page
Loading...
