Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
―
This menu is not available when Picture Mode is set to Cinema, Dynamic Contrast mode.
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
―
This menu is not available when Picture Mode is set to Cinema or Dynamic Contrast mode.
Color Adjust the tint of the screen.
four colour temperature settings (Cool, Normal, Warm and Custom).
• Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the colour.
• Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the colour.
• Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the colour.
• Color Tone: Select a colour tone that best suits your viewing needs.
―
When the external input is connected through HDMI/DP and PC/AV Mode is set to AV (720P @ 60 Hz and 1080P @ 60 Hz), Color Tone has
Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/colour degradation, black level, etc.)
may occur, depending on the connected source device.
In such case, Black Level can be used to adjust the image quality.
• Normal: Select this mode when there is no contrast ratio degradation.
• Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation.
―
This function is only available in HDMI mode.
―
Black Level may not be compatible
with some source devices.
―
The
Black Level feature is only activated at a certain AV
resolution, such as 720P @ 60 Hz and 1080P @ 60 Hz
― Adjust the Black Level because the image quality may differ depending on the external device.
Eye Saver Mode
22
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode
is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At
the same time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as it met the
requirements of TÜV Rheinland “Low Blue Light Content”
standards.
2nd 3rd Description
• Gamma: Adjust the middle level of luminance.
• Saturation: Adjust the saturation level. Values closer to 100 mean greater intensity for the colour.
―
This menu is not available when Eye Saver Mode is enabled.
―
This menu is not available when Picture Mode is set to Cinema mode.
―
This menu is not available when Dynamic Contrast is enabled.
―
The Color feature is only activated at a certain AV resolution, such as 720P @ 60 Hz and 1080P @ 60 Hz
To Next Page
Loading...
