Samsung S27DG50 Series - Connecting the Power Supply; Cable Management

21
Connecting the Power
S27CG55* / S32CG55*
HDMI IN DP IN SERVICE
DC 19V
2
S27DG50* / S32DG50*
HDMI IN DP IN
2
1
Connect the power cord to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V port
on the back of the product.
‒ Rated power consumption for adapters differs depending on the model. Use an adapter that meets
the power consumption specification of the model.
2
Next, connect the power cord to the power outlet.
3
Press the 5-Way / JOG button at the bottom of the product to turn it on.
―
The input voltage is switched automatically.
Tidying Up the Cables
S27CG55* / S32CG55*
1
2
Connect the corresponding cables. Put both cables in the cable holder on the stand
(HOLDER-STAND CABLE) to organise the cables,
as shown in the figure. Assembly is complete.