EasyManua.ls Logo

Samsung S27DG50 Series - Picture Enhancements

Samsung S27DG50 Series
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
2nd 3rd Description
Response Time Accelerate the panel response rate to make video appear more vivid and natural.
It is best to set Response Time to Standard or Faster when you are not viewing a movie or game.
This menu is not available when FreeSync is set.
When Eye Saver Mode is set to On, Low or High, the Extreme (MBR) menu is disabled.
When Local Dimming is set to Off, the Extreme (MBR) menu is activated.
The Extreme (MBR) menu is supported on the S27CG55* / S32CG55* models only.
The Extreme (MBR) menu is only available when Refresh Rate is set to 165Hz (DP) / 144Hz (HDMI).
Adaptive-Sync Adaptive-Sync technology is solution that eliminates screen tearing without all the usual lag and latency.
FreeSync
FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. FreeSync can be operated when you use AMD's
graphic card with supporting FreeSync solution.
For more information, see FreeSync (for AMD graphics card) page.
Low Input Lag Minimise input lag for fast reactions by reducing the video processing time.
This menu is not available when FreeSync is enabled.
If the refresh rate of the PC is different from the setting for Refresh Rate on the product, the function may not be supported.
Black Equalizer Adjust the brightness of the dark areas.
As the value gets closer to 1, the darker areas of the screen become brighter, making it easier to find enemies when playing a game. To find enemies
more easily during a game, use a lower value.
As the value gets closer to 10, the darker areas of the screen become darker and the contrast increases.
This menu is not available when Eye Saver Mode is enabled.
The Black Equalizer feature is only activated at a certain AV resolution, such as 720P @ 60Hz and 1080P @ 60Hz.
Virtual Aim Point Off: Virtual Aim Point is not available while Off is selected.
/ / / / / : Select the preferred aim point style.
Reset Position: Restore the aim point position to the default.

Related product manuals