31
System
2nd 3rd Description
Local Dimming Control the brightness of individual areas on the screen to maximise contrast automatically.
―
This menu is not available when PIP/PBP Mode is enabled.
―
This menu is not available when Eye Saver Mode is enabled.
Volume Change the Volume setting.
Eco Saving Plus The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel.
• Off: Deactivate the Eco Saving Plus function.
• Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
• Low: Saves up to 25 % energy compared to the maximum brightness.
• High: Saves up to 50 % energy compared to the maximum brightness.
―
This menu is not available when Eye Saver Mode is enabled.
―
This menu is not available when PIP/PBP Mode is enabled.
―
This menu is not available when Local Dimming is enabled.
―
This menu is not available when Picture Mode is set to Dynamic Contrast mode.
Dynamic Brightness Automatically adjust the Brightness to provide the best possible screen contrast under the current conditions.
To Next Page
Loading...
Need help?
General