- 17 -
S32BM80*
-2.0° (±2.0°) ~ 15.0° (±2.0°) 0 ~ 120.0 mm (±5.0 mm)
● The product tilt and height can be adjusted.
● When adjusting the tilt and height, hold both sides of the product and avoid using excessive force to prevent
damage.
● When adjusting the stand height, you may hear a noise. This noise is generated because the ball inside the
stand slides when the stand height is adjusted. It is a normal noise and not a product malfunction.
To Next Page
Loading...
