31
2nd 3rd Description
Sharpness Make the outline of objects more clear or blurry. (Range: 0~20)
A higher value will make the outline of objects clearer.
―
This menu is not available when PIP/PBP is enabled.
Color Adjust the colour saturation levels. Colour saturation intensifies as the value nears 50. (Range: 0~50)
―
This menu is not available when Eye Saver Mode is enabled.
―
The Color feature is only activated at a certain AV resolution, such as 720P @ 60 Hz, 1080P @ 60 Hz and 2160P @ 60 Hz.
Tint (G/R) Adjust the ratio of green to red tint levels. Increasing values intensifies the saturation of red and green colours.
Clear motion Adjust the drive frame to sharpen fast-moving images.
―
This menu is not available when PIP/PBP is enabled.
―
This menu is not available when FreeSync Premium Pro is enabled.
―
This menu is only available when connecting to the HDMI Port.
―
This menu is only available when input signal is AV timing and the monitor is in AV mode.
―
It is recommended that this feature be used only when an AV (BD, STB) device is connected.
―
S49CG93*S model only.
Local Dimming Control the brightness of individual areas on the screen to maximise contrast automatically.
―
This menu is not available when PIP Mode is enabled.
―
This menu is not available when Eye Saver Mode is enabled.
―
S57CG95*N model only.
Contrast Enhancer Automatically balance the contrast to prevent excessive differences between bright and dark areas.
HDR Tone Mapping Automatically adjusts the brightness with tone mapping processing according to HDR content information.
Color Tone Select a colour tone that best suits your viewing needs.
―
When the external input is connected through HDMI/DP and PC/AV Mode is set to AV (720P @ 60 Hz, 1080P @ 60 Hz and 2160P @ 60Hz), Color Tone has five
colour temperature settings (Cool, Standard, Warm 1, Warm 2 and Natural).
To Next Page
Loading...
