Samsung QB55C-N

128 pages

To Next Page

To Next Page

Loading...

User Manual

© Samsung

Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.

QBC (QB24C QB43C QB50C QB55C QB65C QB75C QB85C)

QBC-N (QB55C-N QB65C-N QB75C-N QB85C-N)

QBC-T (QB24C-T)

QHC (QH43C QH50C QH55C QH65C QH75C)

QMC (QM32C QM43C QM50C QM55C QM65C QM75C QM85C)

SHC (SH37C)

The color and the appearance may differ depending on the product, and the content in the

manual is subject to change without prior notice to improve the performance.

Recommended hours of use per day for the QBC, QBC-N, QBC-T, QM32C models is less than 16

hours.

If the product is used for longer than 16 hours a day, the warranty may be void.

Table of Contents

Questions and Answers:

V
Virginia Reynolds DVMAug 8, 2025
How to fix Anynet+ not working on Samsung QB55C-N Monitor?
- D
  David JonesAug 9, 2025
  If Anynet+ isn't working on your Samsung Monitor, verify that the connected device is an Anynet+ compatible device. Ensure the device's power cord is properly connected, and check the Video/Audio/HDMI cable connections. Also, confirm that Anynet+ (HDMI-CEC) is turned On in the System menu and that your remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup.
J
Joanne ThompsonAug 13, 2025
Why is Anynet+ not working on my Samsung Monitor?
- J
  Justin CookeAug 13, 2025
  Anynet+ may not work on your Samsung Monitor due to several reasons. First, ensure the device is an Anynet+ compatible device, as the system only supports these. Check that the Anynet+ device's power cord, Video/Audio/HDMI cable connections are properly connected. Also, verify that Anynet+ (HDMI-CEC) is set to 'On' in the System menu and that the remote control is Anynet+ compatible. Anynet+ may not function during initial setup. If you've reconnected the HDMI cable, search for devices again or power cycle your product. Finally, confirm that the Anynet+ function of the Anynet device is enabled.
T
timothy46Aug 18, 2025
Why is the connected device not displayed on my Samsung Monitor?
- J
  Jerry AlvarezAug 18, 2025
  If the connected device isn't showing up on your Samsung Monitor, there are a few things to check: * First, ensure that the device supports Anynet+ functions. * Verify the HDMI cable is properly connected. * Confirm that Anynet+ (HDMI-CEC) is enabled in the System menu. It may also be necessary to search for Anynet+ devices again. Anynet+ requires an HDMI connection, and some HDMI cables might not fully support Anynet+ functions. If there was a power failure or the HDMI cable was disconnected, repeat the device scan.
A
Albert DunnAug 23, 2025
Why is my connected device not displayed on my Samsung Monitor?
- J
  johnsonelizabethAug 25, 2025
  If your connected device isn't showing up, first ensure it supports Anynet+ features. Check that the HDMI cable is correctly plugged in and that Anynet+ (HDMI-CEC) is enabled in the System menu. You may also need to search for Anynet+ devices again. Remember, Anynet+ needs an HDMI connection, and some HDMI cables might not support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
S
Stephanie RamosAug 28, 2025
What to do if the message 'Disconnecting Anynet+ device...' appears on the screen of my Samsung QB55C-N?
- G
  gabrielsotoAug 28, 2025
  If the message “Disconnecting Anynet+ device ...” appears on your Samsung Monitor, it means you cannot use the remote control while Anynet+ is configuring or switching to a view mode. Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
K
Kenneth RamirezSep 2, 2025
How to exit Anynet+ on a Samsung QB55C-N Monitor?
- K
  Kathryn AdamsSep 2, 2025
  To exit Anynet+ on your Samsung Monitor, press the SOURCE button on the monitor's remote control and choose a device that is not Anynet+ compatible.

Samsung QB55C-N Specifications

General

Screen Size	55 inches
Panel Type	VA
Brightness	350 cd/m²
Contrast Ratio	4000:1
Viewing Angle	178° (H) / 178° (V)
Weight	18.5 kg
Response Time	8 ms
Refresh Rate	60 Hz
Color Support	16.7 million colors
Aspect Ratio	16:9
Connectivity	HDMI, USB
Resolution	3840 x 2160 (4K UHD)
Operating System	Tizen 7.0

Summary

Before Using the Product

Safety Precautions

General safety guidelines for product use.

Electricity and Safety

Guidelines for safe electrical connections and usage.

Installation

Instructions for installing the product securely and safely.

Operation

Instructions on how to operate the product safely and effectively.

Preparations

Ports

Using a Touchscreen Monitor

Touchscreen monitor

Configuring Touchscreen Settings

Steps to properly use the touch function in Windows and calibrate the product.

Controlling the Screen

Connecting and Using a Source Device

Before Connecting

Pre-connection checkpoints and recommendations for connecting devices.

Connecting to a PC

Connecting a PC to the product using HDMI or HDMI-DVI cable.

Changing the Input Source

Multiple Display Control

Cable Connection

Control Codes

Information on control commands for managing devices.

Menu

Picture

Adjusting display settings like brightness, contrast, and color.

OnScreen Display

Sound

Network

Network Settings (Wired)

Network Settings (Wireless)

System

Support

Software Update

Upgrading product software to the latest version.

Troubleshooting Guide

Testing the Product

Performing product test function to check normal operation.

Check the followings.

Screen issue

Specifications

General

General specifications for various display models.

Preset Timing Modes

Related product manuals

Preview: Samsung QBC

Preview: Samsung QB13R

Preview: Samsung QB24R

Preview: Samsung QB49N

Samsung QBH Series