Samsung QB24R - User Manual

Quick Setup Guide
QB24R QB24R-T
* Recommended hours of use per day of this product is under 16 hours. If the product is
used for longer than 16 hours a day, the warranty may be void.
* The colour and the appearance may differ depending on the product, and the content in
the manual is subject to change without prior notice to improve the performance.
* Download the user manual from the following Samsung Electronics Website for further
details.
http://www.samsung.com/displaysolutions
-00
Checking the Components
Issues Solutions
The screen keeps
switching on and off.
Check that the cable between the product
and the PC is connected correctly.
No Signal is
displayed on the
screen.
Check that products (including source
device) are connected correctly with a cable.
Check that the source device connected to
the product is powered on.
Depending on the type of external device,
the screen may not display properly. In this
case, connect it with the HDMI Hot Plug
function turned On.
Not Optimum Mode
is displayed.
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table
and set the maximum resolution and
frequency according to the product
specifications.
The images on
the screen look
distorted.
Check the cable connection to the product.
The screen appears
unstable and shaky.
Check that the resolution and frequency of
the PC and graphics card are set within a
range compatible with the product. Then,
change the screen settings if required by
referring to ‘Preset Timing Modes’.
There are shadows or
ghost images left on
the screen.
Troubleshooting Guide
Contact the vendor where you purchased the product if any
components are missing.
Components may differ in different locations.
Quick Setup Guide
Warranty card
(Not available in
some locations)
Power cord
Batteries (AAA x 2)
(Not available in
some locations)
Remote Control RS232C adapter
TOUCH OUT cable
(Supported model:
QB24R-T)
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries.
* Touching and holding on the screen when the product is turned on displays the administrator menu.
* If the touchscreen control is not available, use the remote control to go to System → Touch Control → Touch Control and select On from
the OSD menu. And go to Device to Control and select Samsung SMART Signage or Auto.
* If the administrator menu is not displayed, use the remote control to go to System → Touch Control → Admin Menu Lock and select Off
from the OSD menu.
* Administrator menu may not work properly when connecting a source device.
Administrator menu (Supported model: QB24R-T)
Parts
1 Remote sensor
Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function.
* Using other display devices in the same space as the remote control of this product can cause the other display devices to be
inadvertently controlled.
2 Power button
Turns the product on or off.
Speaker

Summary

Product Components and Controls

Product Parts Overview

Identifies key components like the remote sensor and power button for product operation.

Troubleshooting Common Issues

Provides solutions for screen display problems like flickering, no signal, distortion, and ghosting.

Administrator Menu Access

Instructions on how to access the administrator menu via touch or remote control for settings.

Device Connectivity and Specifications

Connectivity Ports

Details on RS232C, TOUCH OUT, HDMI, RJ45, USB, IR, and Audio connections for various devices.

Product Specifications

Technical details including model, panel size, display area, power, and environmental considerations.

Wall Mount Kit Compatibility

Information on VESA screw hole specifications for mounting the product with a bracket.

Important Safety Instructions

Critical safety warnings regarding electric shock, ventilation, heat sources, and proper usage.

Samsung QB24R Specifications

General

Resolution	1920 x 1080 (Full HD)
Brightness	250 cd/m²
Contrast Ratio	1000:1
Viewing Angle	178°/178°
Response Time	8ms
Aspect Ratio	16:9
Refresh Rate	60Hz
Connectivity	HDMI
Color Support	16.7 Million
Weight	3.0 kg (without stand)