Samsung QB43C User Manual

108 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

User Manual

© Samsung

Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.

QB43C QB50C QB55C QB65C QB75C QB85C

QB55C-N QB65C-N QB75C-N QB85C-N

QH43C QH50C QH55C QH65C QH75C

QM43C QM50C QM55C QM65C QM75C QM85C

The colour and the appearance may differ depending on the product, and the content in the

manual is subject to change without prior notice to improve the performance.

Recommended hours of use per day of this product is under 16 hours. (Supported models: QB*C,

QB*C-N)

If the product is used for longer than 16 hours a day, the warranty may be void.

Table of Contents

Questions and Answers:

J
Jeffrey MilesAug 8, 2025
How to fix Anynet+ not working on Samsung Monitor?
- B
  Beth CooperAug 8, 2025
  If Anynet+ isn't working on your Samsung Monitor, verify that the connected device is an Anynet+ compatible device. Ensure the device's power cord is properly connected, and check the Video/Audio/HDMI cable connections. Also, confirm that Anynet+ (HDMI-CEC) is turned On in the System menu and that your remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup.
Y
yromeroAug 14, 2025
Why is my connected device not displayed on my Samsung Monitor?
- R
  Ricky LambertAug 14, 2025
  If your connected device isn't showing up, first ensure it supports Anynet+ features. Check that the HDMI cable is correctly plugged in and that Anynet+ (HDMI-CEC) is enabled in the System menu. You may also need to search for Anynet+ devices again. Remember, Anynet+ needs an HDMI connection, and some HDMI cables might not support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
C
chandleramyAug 22, 2025
What to do if the message 'Disconnecting Anynet+ device...' appears on the screen of my Samsung QB43C?
- M
  michael33Aug 22, 2025
  If the message “Disconnecting Anynet+ device ...” appears on your Samsung Monitor, it means you cannot use the remote control while Anynet+ is configuring or switching to a view mode. Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
A
anthonymeltonAug 29, 2025
How to exit Anynet+ on a Samsung QB43C Monitor?
- J
  jackmcclainAug 29, 2025
  To exit Anynet+ on your Samsung Monitor, press the SOURCE button on the monitor's remote control and choose a device that is not Anynet+ compatible.

Samsung QB43C Specifications

General

Screen Size	43 inches
Panel Type	VA
Response Time	8 ms
Operating System	Tizen
Aspect Ratio	16:9
Refresh Rate	60 Hz
Color Support	16.7 million colors
Built-in Speakers	Yes
VESA Mount	200 x 200 mm
Contrast Ratio	4000:1
Connectivity	HDMI, USB
Viewing Angle	178°
Resolution	3840 x 2160 (4K UHD)
Brightness	350 nit
Input Ports	HDMI 2.0 (3), USB 2.0 (2), RJ45, Audio Out

Related product manuals

Preview: Samsung QB43N

Preview: Samsung QB49N

Preview: Samsung QBC

Preview: Samsung QB24R

Preview: Samsung QB13R

Samsung QB55C-N

Preview: Samsung QB65H-TR

Samsung QB65H-TR

Samsung QBH Series