EasyManua.ls Logo

Samsung QB55C - User Manual

Samsung QB55C
128 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
QBC (QB24C QB43C QB50C QB55C QB65C QB75C QB85C)
QBC-N (QB55C-N QB65C-N QB75C-N QB85C-N)
QBC-T (QB24C-T)
QHC (QH43C QH50C QH55C QH65C QH75C)
QMC (QM32C QM43C QM50C QM55C QM65C QM75C QM85C)
SHC (SH37C)
The color and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QBC, QBC-N, QBC-T, QM32C models is less than 16
hours.
If the product is used for longer than 16 hours a day, the warranty may be void.

Table of Contents

Questions and Answers

  • D
    David DixonAug 8, 2025
    How to fix Anynet+ not working on Samsung QB55C Monitor?
    • S
      Steven GonzalezAug 8, 2025
      If Anynet+ isn't working on your Samsung Monitor, verify that the connected device is an Anynet+ compatible device. Ensure the device's power cord is properly connected, and check the Video/Audio/HDMI cable connections. Also, confirm that Anynet+ (HDMI-CEC) is turned On in the System menu and that your remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup.
  • T
    Tracy PerezAug 13, 2025
    Why is Anynet+ not working on my Samsung Monitor?
    • H
      halewilliamAug 13, 2025
      Anynet+ may not work on your Samsung Monitor due to several reasons. First, ensure the device is an Anynet+ compatible device, as the system only supports these. Check that the Anynet+ device's power cord, Video/Audio/HDMI cable connections are properly connected. Also, verify that Anynet+ (HDMI-CEC) is set to 'On' in the System menu and that the remote control is Anynet+ compatible. Anynet+ may not function during initial setup. If you've reconnected the HDMI cable, search for devices again or power cycle your product. Finally, confirm that the Anynet+ function of the Anynet device is enabled.
  • M
    mackenziegrayAug 18, 2025
    Why is the connected device not displayed on my Samsung QB55C Monitor?
    • C
      Casey MccarthyAug 18, 2025
      If the connected device isn't showing up on your Samsung Monitor, there are a few things to check: * First, ensure that the device supports Anynet+ functions. * Verify the HDMI cable is properly connected. * Confirm that Anynet+ (HDMI-CEC) is enabled in the System menu. It may also be necessary to search for Anynet+ devices again. Anynet+ requires an HDMI connection, and some HDMI cables might not fully support Anynet+ functions. If there was a power failure or the HDMI cable was disconnected, repeat the device scan.
  • B
    bennettbenjaminAug 23, 2025
    Why is my connected device not displayed on my Samsung QB55C Monitor?
    • J
      Julian MccartyAug 25, 2025
      If your connected device isn't showing up, first ensure it supports Anynet+ features. Check that the HDMI cable is correctly plugged in and that Anynet+ (HDMI-CEC) is enabled in the System menu. You may also need to search for Anynet+ devices again. Remember, Anynet+ needs an HDMI connection, and some HDMI cables might not support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
  • K
    Kimberly SteeleAug 28, 2025
    What to do if the message 'Disconnecting Anynet+ device...' appears on the screen of my Samsung QB55C Monitor?
    • H
      Heather PetersonAug 28, 2025
      If the message “Disconnecting Anynet+ device ...” appears on your Samsung Monitor, it means you cannot use the remote control while Anynet+ is configuring or switching to a view mode. Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
  • M
    michaelruizSep 2, 2025
    How to exit Anynet+ on a Samsung Monitor?
    • F
      frankreidSep 2, 2025
      To exit Anynet+ on your Samsung Monitor, press the SOURCE button on the monitor's remote control and choose a device that is not Anynet+ compatible.

Summary

Before Using the Product

Safety Precautions

Important safety instructions to ensure personal safety and prevent property damage.

Electricity and Safety

Guidelines for safe electrical connections and usage to prevent hazards.

Installation

Instructions and warnings related to the proper installation of the product.

Operation

Guidelines and warnings for the safe and correct operation of the product.

Using a touchscreen monitor

Touchscreen monitor basics

Explanation of how the touchscreen technology works and its usage.

Connecting the touchscreen monitor

Touchscreen configuration and calibration

Guide to calibrate and configure touchscreen settings in Windows.

Touchscreen gestures

Connecting and Using a Source Device

Connecting to a PC

Connecting to a Video Device

Multiple Display Control

Cable Connections

Details on RS232C and LAN cable connections for multi-display control.

Control Codes

Commands and data structures for controlling multiple displays via serial communication.

Settings

Network Configuration

Clone Product Settings

ID Settings

Video Wall Configuration

Customizing multiple display layouts for video wall configurations.

On;Off Timer Settings

Menu

Picture Settings

Adjusting picture quality settings like brightness, contrast, and color.

OnScreen Display Settings

Configuring onscreen menu display, screen protection, and messages.

Sound Settings

Adjusting sound modes, balance, equalizer, and output formats.

Network Settings

Troubleshooting Guide

Pre-Contacting Support

Steps to test the product and check basic connections before seeking support.

Resolution and Frequency Issues

Guidance on setting PC resolution and frequency for optimal display.

Common Problem Checks

Specifications

General Specifications

Detailed specifications including model names, sizes, and resolutions.

Preset Timing Modes

Samsung QB55C Specifications

General IconGeneral
Screen Size55 inches
Viewing Angle178°/178°
Panel TechnologyVA
Color Support1.07 billion colors
Aspect Ratio16:9
VESA Mount400 x 400 mm
Resolution3840 x 2160
ConnectivityHDMI, USB
Built-in SpeakersYes
Brightness350 cd/m²
Response Time8ms (Typ.)

Related product manuals