EasyManua.ls Logo

Samsung QB65C - User Manual

Samsung QB65C
128 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
QBC (QB24C QB43C QB50C QB55C QB65C QB75C QB85C)
QBC-N (QB55C-N QB65C-N QB75C-N QB85C-N)
QBC-T (QB24C-T)
QHC (QH43C QH50C QH55C QH65C QH75C)
QMC (QM32C QM43C QM50C QM55C QM65C QM75C QM85C)
SHC (SH37C)
The color and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QBC, QBC-N, QBC-T, QM32C models is less than 16
hours.
If the product is used for longer than 16 hours a day, the warranty may be void.

Table of Contents

Questions and Answers

  • M
    Meredith SteeleAug 8, 2025
    How to fix Anynet+ not working on Samsung QB65C Monitor?
    • E
      Erin GarciaAug 8, 2025
      If Anynet+ isn't working on your Samsung Monitor, verify that the connected device is an Anynet+ compatible device. Ensure the device's power cord is properly connected, and check the Video/Audio/HDMI cable connections. Also, confirm that Anynet+ (HDMI-CEC) is turned On in the System menu and that your remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup.
  • L
    Linda KelleyAug 13, 2025
    Why is Anynet+ not working on my Samsung QB65C Monitor?
    • A
      Anthony DuranAug 13, 2025
      Anynet+ may not work on your Samsung Monitor due to several reasons. First, ensure the device is an Anynet+ compatible device, as the system only supports these. Check that the Anynet+ device's power cord, Video/Audio/HDMI cable connections are properly connected. Also, verify that Anynet+ (HDMI-CEC) is set to 'On' in the System menu and that the remote control is Anynet+ compatible. Anynet+ may not function during initial setup. If you've reconnected the HDMI cable, search for devices again or power cycle your product. Finally, confirm that the Anynet+ function of the Anynet device is enabled.
  • J
    Jennifer McgeeAug 18, 2025
    Why is the connected device not displayed on my Samsung QB65C?
    • B
      Brandon SalinasAug 18, 2025
      If the connected device isn't showing up on your Samsung Monitor, there are a few things to check: * First, ensure that the device supports Anynet+ functions. * Verify the HDMI cable is properly connected. * Confirm that Anynet+ (HDMI-CEC) is enabled in the System menu. It may also be necessary to search for Anynet+ devices again. Anynet+ requires an HDMI connection, and some HDMI cables might not fully support Anynet+ functions. If there was a power failure or the HDMI cable was disconnected, repeat the device scan.
  • A
    Alexandra HolmesAug 23, 2025
    Why is my connected device not displayed on my Samsung QB65C?
    • A
      amy32Aug 23, 2025
      If your connected device isn't showing up, first ensure it supports Anynet+ features. Check that the HDMI cable is correctly plugged in and that Anynet+ (HDMI-CEC) is enabled in the System menu. You may also need to search for Anynet+ devices again. Remember, Anynet+ needs an HDMI connection, and some HDMI cables might not support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
  • S
    Sandra HammondAug 28, 2025
    What to do if the message 'Disconnecting Anynet+ device...' appears on the screen of my Samsung QB65C?
    • M
      Mr. Joe Taylor Jr.Aug 28, 2025
      If the message “Disconnecting Anynet+ device ...” appears on your Samsung Monitor, it means you cannot use the remote control while Anynet+ is configuring or switching to a view mode. Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
  • K
    Kristin BeckerSep 2, 2025
    How to exit Anynet+ on a Samsung Monitor?
    • P
      patricia88Sep 2, 2025
      To exit Anynet+ on your Samsung Monitor, press the SOURCE button on the monitor's remote control and choose a device that is not Anynet+ compatible.

Summary

Chapter 01 Before Using the Product

Safety Precautions and Handling

Safety warnings, electricity, handling precautions, cleaning, and storage advice.

Installation and Setup

Instructions for product installation, including wall mounting and ventilation.

Operation Guidelines

Operating the product, including safety during use and general operation tips.

Chapter 03 Using a Touchscreen Monitor

Touchscreen Functionality and Precautions

Configuration and Calibration

Steps for configuring touchscreen settings and calibrating the display for accuracy.

Touchscreen Gestures and Control

Chapter 04 Connecting and Using Source Devices

Connecting PCs and Video Sources

Chapter 05 Multiple Display Control

Control Codes and Commands

Chapter 07 Menu and Settings

Picture Settings and Adjustments

Optimizing display quality through picture settings, color, and advanced options.

OnScreen Display and Protection

Sound Settings and Output Options

Adjusting sound modes, volume, equalizer, and audio output formats.

Network Configuration and Setup

Chapter 08 Troubleshooting Guide

Product Testing and Resolution Checks

Procedures for testing product functionality and checking display resolution.

Installation and Screen Issue Resolution

Troubleshooting common installation and screen display problems.

Sound and Remote Control Troubleshooting

Solutions for issues related to audio output and remote control functionality.

Source Device and General Issues

Samsung QB65C Specifications

General IconGeneral
BrandSamsung
ModelQB65C
CategoryMonitor
LanguageEnglish

Related product manuals