38
2nd 3rd Description
Input Port Ver. Select an HDMI version. (1.4 / 2.0↑)
―
The supportable device and resolution may differ depending on its version.
―
When the version is changed, the screen may blink.
―
If you set the HDMI Mode to 1.4, some high resolutions may not be supported because of bandwidth limitation of the HDMI 1.4 protocol.
―
When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the device.
―
Set HDMI Mode to 1.4 if the monitor is connected to an HDMI device and the monitor does not display the screen properly, displays a blank screen, or does
not play sound at all.
Auto Source Switch+ By activating, a new connected source is displayed automatically.
―
This feature is available only when the monitor is turned on. (S49CG93*S model only.)
Panel Care Adjusts settings to protect the screen.
―
S49CG93*S model only.
Pixel Shift Moves pixels at regular intervals to prevent screen issues.
―
When the Pixel Shift mode is used, some of the screen edges may move outside the screen borders and may not be visible. To fix the screen at the home
position, turn off the Pixel Shift mode.
―
To prevent afterimage when viewing content with a lot of static images, turn on the Pixel Shift mode.
Logo Brightness Prevents screen issues by lowering the brightness of fixed images, such as logos and banners.
Key Repeat Time Control the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
To Next Page
Loading...
