Samsung S630 - Back Lash Adjustment

59
Ⅲ.ADJUSTMENT
// PM Batch Test 8 //
// adj control
adj_control check_process_id 65535
adj_control set_process_id 65534
adj_control save_e2prom 1 // save eeprom
adj_control save_data_file 1 // save csv...
adj_control save_process_pass 1
adj_control batch 1 // enable 8 adj...
adj_control osd_delay 0 // OSD Disable
adj_control signal 500// start signal
//adj_control signal 300// start signal
//adj_control signal 300// start signal
//======================================#4.BackLash
mode program
adj_backlash adj_count 2
adj_backlash max_backlash 70
adj_backlash run
poweroff zoom_close
5) BACK LASH ADJ
After changing the MAIN PCB, BARREL and CCD, adjust the BACK LASH.
< How to adjust >
a...Download the Program file and save it to SD memory card.
b...Insert the SD memory card that has program file and turn on the camera.
c...Adjustment will be done automatically.
d...After completing the upgrade, the camera is turned off automatically.
< Description of TXT file >
When making or modifying the program, see the following program codes.
When modify the program, use the Memo Pad of Windows and save it as"STS373ADJ.txt"