Before contacting a service centre
The flash does not fire
oFtash off mode has been selected
-e. Dis-engage flash off mode
oThe camera mode can't use the flash
-+ Refer to the FLASH instruction (p.28)
Incorrect date and time is disDlaev_d
• The date and time have been set incorrectly or the camera has
adopted the default settings
-+Reset the date and time correctly
The camera buttons do not o#erate
• Camera malfunction
-+ Remove/re-insert battery and switch the camera on
A card error has occurred while the memor,z card is in the camera.
Imaaes are too bricLhtht
• Exposure is excessive
-+ Reset exposure compensation
No imaqe on external monitor
• The external monitor has not been connected properly with
the camera
-e. Check the connection cables
oThere are incorrect files in the memory card
-+ insert a memory card that has correct files
When usin__[Removabte Disk] file does not show
• Cable connection is incorrect
-e. Check the connection
oThe camera is off
-+ Turn the camera on
• incorrect memory card format
-+ Re-format the memory card
The ima_y back
• Incorrect file name (Violation of DCF format)
-+ Do not change the image file name
Cotour of imaae is different to the oriqinal scene
oWhite balance or effect setting is incorrect
-+ Select appropriate White balance and effect
• The operating system is not Windows 98SE, 2000, ME, XP,
Vista / Mac OS 9.2 - 10.4. Alternatively the PC does not support USB
-+ Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 9.2 - 10.4
to PC that supports USB
oThe camera driver is not installed
-+lnstall a [USB Storage Driver]
PLAY(73}
To Next Page
