Remote Control Issues
When the remote control isn't working, these steps may help resolve the problem.
The remote control does not work.
The connection between the remote control and the TV may be lost.
Point the Samsung Smart Remote at the front of the TV, and then press and hold the and buttons
simultaneously for 3 seconds or more.
To reset a previously connected remote control, press and hold the and buttons simultaneously for more
than 3 seconds. The remote control connection is reset.
Also, if the remote control does not work properly or its response is very slow, the battery might be low or dead.
• Charge the remote control by using the USB port (C-type) on the bottom, or turn over the remote to expose the
solar cell.
– You can check remaining battery of Samsung Smart Remote with solar cell in
left directional button
Settings All Settings General & Privacy Remote Control.
This function may not be supported depending on the model.
• If the remote control has batteries, replace them with new ones.
- 246 -
To Next Page
Loading...
