Samsung Samtron 98BDF

Questions and Answers

G
gibbssarahAug 12, 2025
What to do if my Samsung Samtron 98BDF has no image on the screen?
- C
  Carrie MasonAug 12, 2025
  If there is no image on the screen of your Samsung Monitor, here are a few things you can try: * Check the power cord connection and supply. * Check the signal cable connection. * Press a key on the keyboard or move the mouse to activate the monitor. If the initial screen appears, boot the computer in safe mode and change the frequency of the video card. If the initial screen does not appear, then the signal from the video card may exceed the maximum resolution. In this case, adjust the maximum resolution and frequency applicable to the monitor.
M
Matthew MathisAug 21, 2025
Why is my Samsung Samtron 98BDF Monitor not turning on and showing no image?
- M
  Mark DavisAug 21, 2025
  If your Samsung Monitor is not turning on and showing no image, consider the following: * Ensure the power cord is securely connected and the power supply is working. * Verify the signal cable connection. * The signal from the video card may exceed the maximum resolution and frequency that the monitor can properly handle, so adjust the resolution and frequency. * Try pressing a key on the keyboard or moving the mouse to activate the monitor.
A
Alexa WilkinsSep 1, 2025
How to fix a Samsung Samtron 98BDF with no image?
- C
  Cynthia Mason MDSep 1, 2025
  To fix a Samsung Monitor that displays no image, try these steps: 1. Check the power cord and its connection. 2. Check the signal cable connection. 3. Adjust the maximum resolution and frequency applicable to the monitor. 4. Press a key on the keyboard or move the mouse.

Samsung Samtron 98BDF Specifications

General

Screen Size	19 inches
Resolution	1280 x 1024
Aspect Ratio	5:4
Brightness	250 cd/m²
Contrast Ratio	500:1
Connectivity	VGA
Display Type	CRT
Max Resolution	1280 x 1024
Vertical Refresh Rate	50-160 Hz
Input Connectors	15-pin D-Sub
Viewing Angle (Horizontal)	160 degrees
Viewing Angle (Vertical)	160 degrees