34 – High Resolution Compact ATM Camera
How to use OSD Menu
Use the
cdef
switch to select one from PRIVACY
1 through 12.
Select one from PRIVACY 1~12 and press the SETUP
switch to confi rm your setting. You can specify a pixel
that moves as you change the PIXEL LEVEL to set
the position.
PRIVACY ZONE SET1
PIXEL LEVEL [4]
<POINT>
<POSITION>
- How to set the point
You can set each position of the 4 points.
1 If you press the SETUP switch in <POINT>,
you will see the points available in the PRIVACY
ZONE. Each time you press the SETUP switch,
the points available will move.
2 Use the
cdef
switch to set the position of
each point. Set each position of the four points
and press the SETUP switch to complete the
positioning.
- How to set the position
You can move the position of the overall area.
1
By pressing the SETUP switch in <POSITION>,
you can move the overall position of the privacy
zone.
2
Use the
cdef
switch to move the position
and press the SETUP switch to confi rm it.
Note :
If more than one PRIVACY ZONE is specifi ed and the PRIVACY
SET is set to ON, the PIP function will be deactivated.
If the 12th PRIVACY ZONE is specifi ed, the LINE function of
FENCE will be deactivated.
–
–
To Next Page
Loading...
