l
COLOR
: The picture is always displayed in color.
B/W
: The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
AUTO
: The mode is switched to ’Color
‘ in a normal environment, but
switches to ’B/W‘ mode when
ambient illumination is low. To set
up the switching time for AUTO
mode, press the Function Setup
switch. You can turn on or off the
burst signal on B/W mode.
DURATION : You can select the
day/night switching point.
DWELL TIME : You can select the duration time about changing the day/
night mode.
→
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
Color → B/W B/W → Color
Early 2.5 lux 5 lux
Late 1 lux 10 lux
※ The day/night switching point of the camera can be adjusted.
When AGC in the EXPOSURE menu is ‘OFF’, AUTO mode is not available to select.
y
y
y
-
-
AUTO SETUP
▶ 1.BURST MODE ON
2.COLOR→B/W
DURATION FAST
DWELL TIME 3 SEC
3.B/W→COLOR
DURATION FAST
DWELL TIME 10 SEC
4.RETURN
To Next Page
Loading...
