Need help?Do you have a question about the Samsung SCD-2080N and is the answer not in the manual?
General| Effective Pixels | 768(H) x 494(V) |
|---|---|
| Lens | 3.6mm Fixed |
| Focal Length | 3.6mm |
| Operating Temperature | -10°C to +50°C |
| Power Supply | 12V DC |
| Iris Control | Manual |
| IR Distance | Up to 20 meters |
| Sensor | 1/4" CCD |
| Signal to Noise Ratio | 48dB |
| Mount Type | Board Type |
| Min. Illumination | 0.15Lux (F1.2, 50IRE), 0.00Lux (IR LED On) |
| Minimum Illumination | 0.15 Lux (F1.2, 50 IRE), 0.0 Lux (IR LED on) |
Guidelines for safe installation and operation concerning temperature, humidity, light, shock, and exposure.
Instructions for environmentally responsible disposal of the camera and its electronic components.
Identification and description of the camera's main parts, including the lens and mounting hardware.
Key advice for installation, covering handling, environmental concerns, and notes on mounting.
Steps for removing the dome cover and shield case from the camera body.
Procedure for attaching the camera to a ceiling mounting bracket.
How to adjust the camera's viewing direction using the pan, tilt, and rotate controls.
Instructions for connecting the camera to a monitor and its power supply.
Details on setting up coaxial communication and OSD control methods.
Recommended video cable types and specifications based on transmission distance.
Accessing and navigating the camera's main setup menu and its basic functions.
Adjusting screen brightness, shutter speed, and gain for optimal video output.
Configuring shutter modes, automatic gain control, and low-light sensitivity (SENS-UP).
Selecting and fine-tuning white balance for accurate color representation under various lighting.
Optimizing image contrast and clarity in backlit or high-contrast lighting conditions.
Configuring HLC, BLC, and SSNR3 for enhanced image performance and noise reduction.
Utilizing High Light Compensation and Super Noise Reduction for better visual quality.
Adjusting the SSNR3 noise reduction level for optimal performance in low light.
Switching between color and monochrome modes based on ambient light conditions.
Setting up special modes like burst signal, duration, and dwell time for day/night transitions.
Fine-tuning image properties like sharpness and configuring display settings for different monitors.
Adding custom camera titles and configuring on-screen display elements.
Configuring motion detection areas and setting up privacy masks for specific zones.
Setting camera synchronization types and selecting the preferred menu language.
Saving settings, discarding changes, or resetting the camera to factory defaults.
Guidance on resolving common operational problems, connectivity, and image quality issues.
Detailed technical data including electrical, video, lens, and operational parameters.
Diagrams and measurements illustrating the camera's physical size, mounting compatibility, and weight.
To Next Page
