When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
If you increase the SHARPNESS level too high, the picture may become distorted or noise
may appear.
Monitor
: Please change the settings value of video appropriate to your monitor.
LCD : Please select this menu item when
using an LCD monitor.
You can change the gamma, PED
level and color gain in the sub menus.
CRT : Please select this menu item when
using a CRT monitor.
USER :
Please use this menu item when
using a monitor other than standard ones. You can change the gamma,
PED level and color gain in the sub menus.
CAM TITLE
:
If you enter a title, the title will appear on the monitor.
➊
If the SPECIAL menu screen is displayed, use the Function Setup switch so
that the arrow indicates ‘CAM TITLE’.
➋
Set it to ‘ON’ by using the Function
Setup switch.
➌
Press the Function Setup switch.
➍
Use the Function Setup switch to
move to a desired letter and select the
letter by pressing the switch. Repeat
this to enter multiple letters. You can
enter up to 15 letters.
➎
Enter a title, move the cursor to ’
POS’ and press the Function Setup
switch. The entered title appears on the
screen. Select the position to display the
title on the screen by using the Function
Setup switch and press. When the position
is determined, select ’END’ and press
the Function Setup switch to return to the
SPECIAL menu.
y
-
-
-
y
CAMERA TITLE SETUP
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.0123456789
←→ CLR POS END
_______________
LCD MONITOR
▶ GAMMA 0.55
PED LEVEL
IIIII
Â
IIIIIIIIIIIIIIII
17
COLOR GAIN
IIIIIIIIIIIIIII
Â
IIIIII
50
RESET
Press SET to Return
FRONT DOOR
To Next Page
Loading...
