COLOR DOME CAMERA SUD-3080
36
COLOR DOME CAMERA SUD-3080
37
Operating Your Camera
úMOTION : Select motion types to detect.
Ⱂ
OFF : Not being used.
Ⱂ
DETECTION : Since the camera detects motion without any additional external
sensor, you can monitor activity more efficient.
Ⱂ
TRACKING : Commands the camera to detect and
trace a moving object.
Ķ
FENCE : You can select up to 4 FENCE.
Ķ
MODE : Determines whether to use the fence
selected in the FENCE.
Ķ
TYPE : Two types, line and area, of fences are
available.
Ķ
COUNT : Displays the number of times that an
object enters or leaves a fenced area.
Ķ
FILL : Fill or remove color from the FENCE.
Ķ
POSITION : Defines the position and detection direction of a line or fenced area.
1) LINE FENCE
-
SEL POS : Selects a position from POS1,POS2.
- X POS / Y POS : Adjust the size and position of the selected line fence.
- DIRECTION
Ⱂ
DIR1 : Detects objects moving left to right on the fence line.
Ⱂ
DIR2 :
Detects objects moving right to left on the fence line.
Ⱂ
DIR1/2 : Detects all objects moving crosswise on the fence line.
-
RETURN : Select this to save the POSITION menu settings and return to the
TRACKING menu.
2) AREA FENCE
- SEL POS :
Selects a position from POS1 ~ POS4.
- X POS / Y POS : Adjust the size and position of the selected area fence.
- DIRECTION
Ⱂ
IN : Detects objects entering the fenced area.
Ⱂ
OUT : Detects objects exiting the fenced area
Ⱂ
IN/OUT : Detects all objects entering and exiting the fenced area.
- RETURN : Select this to save the POSITION menu settings and return to the
TRACKING menu.
Ķ
RETURN : Select this to save the TRACKING menu settings and return to the
INTELLIGENCE menu.
•A detection (FIXED/MOVED) error may occur if :
· multiple motions occur continuously in random directions
· a fixed object moves in one position continuously
· a second object screens the first moving object
Notes
ú DETECT BOX : Outlines an object on the screen in a box when its movement
matches a custom Motion Type.
ú
ALARM OUT : Releases a signal from the MD Output Terminal of the External Cable
when an object’s movement matches a custom Motion Type.
ú DETECT AREA : Defines the Motion Detection area.
ú MASK AREA : Specify a detection exception area to
mask.
Select a mask area number and specify
the size and position.
Ķ
AREA : You can select up to 4 areas.
Ķ
MODE : Determines whether to use the area
selected in the AREA.
Ķ
TOP / BOTTOM / LEFT / RIGHT : Adjust the size and position of the selected area.
Ⱂ
FIXED/MOVED : Detects an object that emerges or disappears from the screen, or
stays onscreen without movement
.
To Next Page
Loading...
