Operating Your Camera
20_ Operating Your Camera
3. Use the Up/Down buttons to select a desired function.
• Move the button right or left to display available values or settings.
Set the desired setting value using the button.
4. To finish, select <EXIT> and press the SET button.
M
An item with the icon also has sub menus. To select a sub menu, select an item with the icon and
press the Function Setup switch.
An item with the --- icon is unavailable due to function settings.
LENS
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed,
select <LENS> by using the Function Setup
switch so that the arrow indicates <LENS>.
2. Adjust the focus automatically or manually
when SETUP menu screen is displayed.
•
DC
- ONE-PUSH : Adjust the focus automatically.
- MANUAL : Adjust the zoom and focus
manually using the Function Setup switch.
J
The focus may not fit correctly in the following
cases:
-
Sudden change to the object in One Push
Focus mode (sudden movement, appearance or
disappearance)
-
Radical change to the brightness in One Push Focus mode
-
Image of a low contrast
-
If the camera is exposed to a strong light source in the front or surroundings
-
If the lens is covered with impurities
-
In a situation where One Push Focus is hardly applied, try to make recording with a high
contrast object or use the MF (manual focus) mode.
-
If the focus does not fit in situations other than the above, use MF instead.
MAIN SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. SSDR ON
5. BACKLIGHT OFF
6. SSNR3 ON
7. DAY/NIGHT AUTO
8. SPECIAL
9. EXIT
►
FUCUS ADJUST
1. ONE-PUSH
2. MANUAL
3. RETURNL
►
To Next Page
Loading...
