Samsung SCD107 - Notices and Safety Instructions; Safety Instructions

DV
IEEE
1394
USB
A/V
S-VIDEO
MIC
S-VIDEO
S-VIDEO
Audio/Video
TV
CAMCORDER
VIDEO
AUDIO(L)
AUDIO(R)
EASY
REC SEARCH FADE BLC
REV FWD S.SHOW MULTI DISP.
TAPE
MEMORY
CARD
PHOTO
TAPE PLAYBACK
1.Connect the camcorder to a TV with the AUDIO/VIDEO cable.
■ The yellow plug : Video
■ The white plug : Audio(L) - Mono
■ The red plug : Audio(R)
2. Set the mode switch to the TAPE position.
3. Set the power switch on the camcorder to PLAYER mode.
4. Using the (FF) and (REW) buttons, find the first position
you wish to play back.
Press the (PLAY/STILL) button.
1. Turn the Power switch to OFF.
2. Insert the Memory Card into the Memory Card slot located on
the bottom of the camcorder, in the direction of the arrow.
3.
Set the mode switch to MEMORY CARD.
4. Set the power switch to the CAMERA mode.
5.
■
Still Image : ➀ Press the PHOTO button to record a picture.
■
MPEG4 : ➀ Press START/STOP button to start recording.
(up to 20 seconds)
DSC Recording
TAPE
MEMORY
CARD
1
3
4
5
5
2
1
2
3
4
TAPE
MEMORY
CARD
1. Turn the Power switch to OFF.
2. Insert the Memory Card into the Memory Card slot located
beneath the camcorder, in the direction of the arrow.
3.
Set the mode switch to MEMORY CARD.
4. Set the power switch to the PLAYER mode.
5. Select the Storage Media (MPEG4,PHOTO) to playback
➀ Press the MENU button and turn the MENU DIAL to high-
light MEMORY.
➁ Press the ENTER button to enter sub-menu.
➂ Use the MENU DIAL to select MPEG4(PHOTO) from the
sub-menu. (M. PLAY SELECT)
➃
To exit the menu, push the MENU button.
DSC PLAYBACK
3
1
2
4
DELTA2-107-Quick Guide-(D107) 5/21/04 10:52 AM Page 2
All manuals and user guides at all-guides.com