ENGLISH
6969
Playback
✤ The playback function works in PLAY mode only.
Playback on the LCD
✤ It is practical to view a tape using the LCD when in a car or outdoors.
Playback on a TV monitor
✤ To play back a tape, the television must have a compatible color system.
✤ We recommend that you use the AC Power Adapter as the power source for the camcorder.
Connecting to a TV which has Audio/Video input jacks
1. Connect the camcorder and TV with the AUDIO/VIDEO cable.
■
The yellow plug : Video
■
The white plug : Audio(L) mono
■
The red plug : Audio(R)
- If you connect to a monaural TV or VCR, connect the yellow plug (Video) to
the video input of the TV or VCR and the white plug (Audio L) to the audio
input of the TV or VCR.
2. Set the power switch on the camcorder to PLAY mode.
3. Turn on the TV and set the TV/VIDEO selector on the TV to VIDEO.
■
Refer to the TV or VCR user’s manual.
4. Play the tape.
Notes
■
You may use an S-VIDEO cable to obtain better quality pictures if you have a S-VIDEO connector on your TV.
■
Even if you use an S-VIDEO cable, you need to connect an audio cable.
■
If you connect the cable to the Audio/Video Jack, you will not hear sound from the Camcorder's speakers.
Tape Playback
To Next Page
Loading...
