73
S e t u p
72
S e t u p
Receiving a Fax or Data File
To Receive a fax or data, ensure that your phone is
connected to your PC and is powered on and select a
desired option.
When you receive a fax call, setup the Answer mode in
the Fax program on your PC and click on Receive and
select one of the following:
• Automatic Receive (recommended)
• Manual Receive
Sending a Fax or Data File
When connected to a computing device, your phone
allows wireless fax and data transmissions. Your
computing device software initiates the call to the
destination phone number. The phone functions as a
wireless modem to send the fax or data file to the
number designated by your PC software.
Data/Fax Menu *-7
Your phone is capable of sending and receiving digital
data and fax call when connected to a computing device
(laptop, desktop, handheld, palmtop, etc.) running
Windows 95, Windows 98, or Windows NT. The phone
functions just like a typical modem on your PC, enabling
you to use wireless data involving a side variety of
Windows software applications.
To use digital data or fax services with your phone, you
will need to obtain digital data/fax kit from your service
provider. This kit will contain the necessary cables,
software, and documentation required for your to
connect and use your phone with your computing device.
Note: The phone must be on a digital network to
receive or send fax and data.
The following options are available:
Data/Fax Off : No incoming data/fax calls can be
received.
Fax for Next Call : Waiting for fax call, No voice alls
can be received for next 10 minutes.
Fax until Powered Off : Novoice call scan be received.
Data for Next Call : Waiting for data call. No voice
calls can be received.
Data until Powered Off : No voice calls can be
received.
To Next Page