Samsung SCH-U660 - Size; Volume Key Control

104
Service Alerts
Configure settings for sounds your phone plays to notify you of
changes in system or service status.
1. From the Home screen, select MENU ➔
Settings & Tools ➔ Sounds Settings ➔ Service Alerts .
2. Choose On or Off for these alerts:
•ERI : A sound plays when you enter and exit network coverage
areas.
• Minute Beep : During calls, a beep plays once per minute.
• Call Connect : A sound plays when a call connects and ends.
• Software Update : A sound plays when a software update is
complete.
3. Press OK to save.
Power On / Off
Control the sounds your phone plays when you turn the phone on
or off.
1. From the Home screen, select MENU ➔
Settings & Tools ➔ Sounds Settings ➔ Power On / Off .
2. Choose On or Off for Power On and Power Off, then press
SET .
Driving Mode
Driving Mode overrides the Master Volume level and converts all
visual notifications to sounds. When Driving Mode is On, Master
Volume is set to High, and Call Alert sounds will play regardless
of the sound setting. You can choose to have Caller ID read out
for incoming calls or messages, or choose to have Caller ID and
message contents read out.
1. From the Home screen, select MENU ➔
Settings & Tools ➔ Sounds Settings ➔ Driving Mode .
2. Choose a setting:
• Caller ID Only : Reads out Caller ID for incoming calls and
messages.
•ID & Message : Reads out Caller ID and the message content for
incoming messages.
•Off : Driving Mode is not enabled.