Need help?Do you have a question about the Samsung SCO-5083R and is the answer not in the manual?
Details copyright ownership, reproduction restrictions, and disclaimers for the user manual.
Lists registered trademarks and outlines the product's warranty period and exclusions.
Describes the SCO-5083R series models (NTSC/PAL) and the signal system configuration.
Covers precautions against electric shock, safe usage near water, and proper installation of the apparatus.
Details safety instructions for power adapters, connections, and secure camera mounting to prevent injury.
Advises on avoiding humid, dusty, or high/low temperature locations, and protecting from sunlight.
Provides guidelines for safe operation, including handling, cleaning, and relocation procedures.
Outlines the FCC Rules compliance and Canadian ICES-003 regulations for the digital apparatus.
Provides instructions for the correct disposal of the product and its batteries according to environmental regulations.
Lists essential instructions for reading, keeping, following warnings, and safe handling of the apparatus.
Details requirements for servicing and specifies the power supply unit for the product.
Highlights Samsung Techwin's environmental initiatives and RoHS compliance.
Explains features like High Resolution, Excellent Sensitivity, SSDR, and WDR for superior image quality.
Details intelligent features, SSNR4 noise reduction, Day&Night operation, and DIS stabilization.
Covers HLC, REVERSE, D-ZOOM, SHARPNESS, PRIVACY, OSD languages, and communication protocols.
Lists and shows images of the accessories included in the product package.
Identifies and describes the components on the front of the camera, including the sunshield and adjustment levers.
Details the function jack, video output jack, and power input terminal located on the back of the camera.
Provides step-by-step instructions for adjusting the lens's zoom and focus, including cover removal and lever tightening.
Explains how to connect the camera's video output to a monitor for viewing.
Illustrates the procedure for connecting the camera to its power source.
Discusses the impact of copper wire resistance and voltage drop on camera performance.
Explains the coaxial communication system and the OSD control method for camera settings.
Details how to configure RS-485 communication for controlling the camera via computer or DVR.
Lists recommended coaxial cable specifications based on transmission distance for optimal video signal.
Overviews the main setup categories like Profile, SSDR, White Balance, Exposure, Backlight, Special, and Exit.
Explains the procedure for navigating menus and making settings using the Function Setup switch.
Describes how to set up various profile modes such as BASIC, DAY/NIGHT, BACKLIGHT, and ITS for optimal camera performance.
Details the INDOOR and USER profile settings, including custom configuration and automatic saving.
Explains the SSDR function for enhancing image contrast in challenging lighting conditions.
Covers the different White Balance modes like ATW, OUTDOOR, INDOOR, MANUAL, AWC SET, and MERCURY for accurate color reproduction.
Details how to adjust Brightness, Lens settings (Iris, Focus), Shutter Speed, and Automatic Gain Control (AGC).
Explains the SSNR4 function to reduce noise in low-light conditions, improving image clarity.
Describes the User BLC for area enhancement and HLC for masking strong light sources to prevent overexposure.
Explains the WDR mode which enhances detail in scenes with both bright and dark areas simultaneously.
Covers display options including setting a camera title, OSD font color, and language selection.
Details settings for communication protocol, CAM ID, BAUD RATE, UART MODE, and COAX communication.
Explains image adjustment settings like GAMMA, PED LEVEL, COLOR GAIN, H-REV, V-REV, D-ZOOM, and SHARPNESS.
Details automatic and manual switching between color and B/W modes, including burst mode and dwell time settings.
Explains the Defog function for improving visibility in fog or smog, and Privacy Masking to hide specific screen areas.
Describes the DIS function that mitigates picture movement caused by external factors like wind.
Covers the setup for tampering detection, including sensitivity, alarm output, and OSD display.
Details settings for motion detection, including object size, area selection, sensitivity, and non-detection areas.
Explains intelligent video functions like sensitivity, object size detection, and virtual fence configuration.
Details the setup for area fences, including selection, position, direction, and count settings for detection.
Explains the options for saving settings, discarding changes, or resetting the camera to factory default configurations.
Provides solutions for common camera problems such as no image, dim image, dark image, and connectivity issues.
Lists detailed specifications for video output, imaging device, resolution, and lens characteristics.
Covers specifications for defog, digital stabilization, communication, environmental conditions, and electrical requirements.
Provides a diagram illustrating the physical dimensions of the camera in millimeters.
Lists contact addresses and phone numbers for Samsung Techwin offices worldwide.
To Next Page
General
