Why is my Samsung IP Camera not connecting to the wireless hub?
If your Samsung IP Camera is not connecting to the wireless hub, it might be due to a poor wireless internet connection in the installation environment. In such cases, using a wired connection is advisable. Also, double-check the password for the wireless hub and try connecting again.
How to fix Samsung IP Camera video when it is temporarily lost?
If the video from your Samsung IP Camera is temporarily lost, check if the product and the camera are too far apart.
What to do if I fail to register my Samsung SMARTCAM D1 after logging in?
If you are unable to register your Samsung IP Camera after logging in, first verify that the serial number you entered matches the label on the device. Then, ensure you're using the correct password and try registering again. Also, check if the LED light on the device is yellow. If these steps don't work, you can factory reset the device by pressing and holding the RESET button for 10 seconds, then repeat the registration process.
What to do if there is no sound from my Samsung IP Camera video?
If there is no sound output from the video of your Samsung IP Camera, it may be because some internet service providers do not support audio outputs in relay mode. Try clicking the Voice icon on the video playback page, or check if the voice is turned on in your smartphone app.
Device compliance with Part 15 of FCC Rules, subject to conditions.
Equipment tested for Class B digital device limits, designed for residential protection.
Changes void authority, transmitter must not be co-located.
Device compliance with RSS-247, subject to conditions.
Complies with IC radiation exposure limits for uncontrolled environments.
Safety precautions for product assembly, installation, and usage to prevent hazards.
Overview of key features like easy installation, remote monitoring, and real-time alarms.
Advises on environmental factors and cleaning to ensure proper installation.
Guide on downloading the app, creating an account, and registering the SmartCam D1.
Detailed technical specifications for video and lens components of the device.
Guidelines for environmentally responsible disposal of the product and accessories.
Lists head office and regional contact details for Hanwha Techwin.
Device compliance with Part 15 of FCC Rules, subject to conditions.
Equipment tested for Class B digital device limits, designed for residential protection.
Changes void authority, transmitter must not be co-located.
Complies with FCC radiation exposure limits for uncontrolled environments.
Device compliance with RSS-247, subject to conditions.
Caution regarding operation in specific frequency bands and radar interference.
Complies with IC radiation exposure limits for uncontrolled environments.
General| Image Sensor | 1/2.7" CMOS |
|---|---|
| Frame Rate | 30 fps |
| Night Vision | Yes |
| Motion Detection | Yes |
| Operating Temperature | -10°C to 50°C |
| Weight | 200 g |
| Resolution | 1920 x 1080 |
| IR Distance | Up to 10m |
| Wireless | 802.11 b/g/n |
| Security | WEP, WPA2 |
| Audio | Two-way audio |
| Local Storage | microSD |
| Cloud Storage | Optional (Subscription Required) |
| Power | 5V DC |
| Dimensions | 70 x 70 x 120mm |
To Next Page
