30_ Operating Your Camera
Operating Your Camera
CRT : Please select this menu item
when using a CRT monitor. You
can change the PED level, color
gain in the sub menus.
USER : Please use this menu item when
using a monitor other than
standard ones. You can change
the gamma, PED level and color
gain in the sub menus.
CAM TITLE
: If you enter a title, the title will appear on the monitor.
➊
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘CAM TITLE’.
➋
Set it to ‘ON’ by using the Function
Setup switch.
➌
Press the Function Setup switch.
➍
Use the Function Setup switch to
move to a desired letter and select the
letter by pressing the Function Setup
switch. Repeat this to enter multiple letters. You can enter up to 15 letters.
➎
Enter a title, move the cursor to ‘POS’
and press the Function Setup switch.
The entered title appears on the screen.
Select the position to display the title on
the screen by using the Function Setup
switch and press the Function Setup
switch. When the position is determined,
select ‘END’ and press the Function
Setup switch to return to the SPECIAL
menu.
When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you
enter one.
Only English is available in the mode.
If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To
edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch.
Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then
press the Function Setup switch.
-
-
y
CAMERA TITLE SETUP
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.0123456789
←→ CLR POS END
_______________
FRONT DOOR
LCD MONITOR
▶ GAMMA 0.55
PED LEVEL
IIIII
Â
IIIIIIIIIIIIIIII
17
COLOR GAIN
IIIIIIIIIIIIIII
Â
IIIIII
50
RESET
Press SET to Return
To Next Page
Loading...