Samsung SCV-2081R - BACKLIGHT COMPENSATION

22_ setup
setup
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary W-V DSP chip.
When the SETUP menu screen is displayed,
select ‘BACKLIGHT’ by using the Function
Setup switch so that the arrow indicates
BACKLIGHT .
Select a desired mode using the Function Setup
switch depending on the camera purpose.
BLC : Enables a user to directly select a
desired area from a picture, and to
view the area more clearly.
LEVEL : Adjust level of the BLC function.
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HLC (High Light Compensation) :
This function masks the strong light to minimize white out due to over exposure and
preserve much of the on-screen details when the camera aims a strong light source.
LEVEL : Adjusts the brightness level of a
monitoring area.
LIMIT : Enable to change the operating
condition.
MASK COLOR/TONE :
Change the color / brightness of the masking
area. (Black, Red, Blue, Cyan, Magenta)
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
OFF : Not being used
Select a desired mode using the Function Setup switch and press the switch.
Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.
In a dark environment, the HLC is only activated when a high light that is larger than a certain area
is present.
1.
2.
y
-
-
y
-
-
-
-
y
3.


BLC SETUP
君 LEVEL
MIDDLE
TOP
IIIII
Â
IIIIIIIIIIIIIIII
38
BOTTOM
IIIIIIIIIIIIIIIIII
Â
III
109
LEFT
IIIIII
Â
IIIIIIIIIIIIIII
54
RIGHT
IIIIIIIIIIIIIIII
Â
IIIII
121
Press SET to Return
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
君 5.BACKLIGHT OFF
6.SSNR3 ON
HLC SETUP
君 LEVEL
MIDDLE
LIMIT
NIGHT ONLY
MASK COLOR BLACK
MASK TONE
Â
IIIIIIIIIIIIIIIIIIIII
1
TOP
Â
IIIIIIIIIIIIIIIIIIIII
5
BOTTOM
IIIIIIIIIIIIIIIIII
Â
III
120
LEFT
Â
IIIIIIIIIIIIIIIIIIIII
5
RIGHT
IIIIIIIIIIIIIIIIIIIII
Â
172
Press SET to Return
M