a
The HLC is not activated in light or overly dark conditions. (In NIGHT ONLY mode.)
When HLC Function is used, D-ZOOM and DIS function are not activated.
SSNR3
This function reduces the background noise in a low luminance environments.
When the SETUP menu screen is displayed,
select 'SSNR3' by using the Function Setup
switch so that the arrow indicates 'SSNR3' .
Select a desired mode using the Function
Setup switch.
OFF
: Deactivates SSNR3 so that noise is
not reduced.
ON
: Activates SSNR3 so that noise is
reduced.
Set the SSNR3 mode to 'ON' and press the
Function Setup switch. Then you can adjust
the noise reduction level.
You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'.
When adjusting the noise reduction level of the SSNR3 mode, remember that the higher the level
set, the more the noise level will be reduced but that after image may also occur.
1.
2.
y
y
3.
SSNR3
君 LEVEL
IIII
Â
IIIIIIIIIIIIIIIII
10
Press SET to Return
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
君 6.SSNR3 ON
7.DAY/NIGHT AUTO
M
To Next Page
Loading...
