Samsung SCV-2081R - DAY;NIGHT MODES

24_ setup
setup
DAY/NIGHT
You can display pictures in color or black and white.
When the SETUP menu screen is displayed,
select ‘DAY/NIGHT’ by using the Up and
Down buttons so that the arrow indicates
‘DAY/NIGHT’.
Select a desired mode using the Left and
Right buttons according to the picture
display you want.
COLOR
: The picture is always displayed
in color.
B/W : The picture is always displayed in
black and white.
You can turn on or off the burst signal
on B/W mode.
IR LED Mode: On: 12EA, Off: 6EA
IR MODE : When IR LED is turned on
in B/W, the objects can be
clearly identifi ed due to the
function that decreases
screen saturation of objects
within a short distance.
AUTO : The mode is switched to “Color”
in a normal environment, but
switches to “B/W” mode when
ambient illumination is low. To set
up the switching time for AUTO
mode, press the Function Setup
switch.
BURST MODE : You can turn on or
off the burst signal on B/W mode.
DWELL TIME : You can select the duration time about changing the day/
night mode.
→
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
DURATION : You can select the brightness level at which the camera
switches from day to night mode.
1.
2.
y
y
-
-
y
-
-
-
AUTO SETUP
▶ 1.BURST MODE ON
2.COLOR→B/W
DURATION FAST
DWELL TIME 3 SEC
3.B/W→COLOR
DURATION FAST
DWELL TIME 10 SEC
4.RETURN
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
君 6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
IR MODE SETUP
▶ TOP
IIIIIIIIIIIIIIIIIII
Â
IIIII
50
BOTTOM
IIIIIII
Â
IIIIIIIIIIIIIII
110
LEFT
IIIIIIIIIIIIIIIIIII
Â
IIIII
52
RIGHT
Â
IIIIIIIIIIIIIIIIIIIIII
118
Press SET to Return