Troubleshooting
Samsung Electronics
Service Manual
6-23
6.6.1 No Dial Tone
• Description
There is no dial tone when the On-Hook dial button is pressed.
6.6 Fax & Phone Problems
Check and Cause Solution
1. Check that the telephone line cord supplied with
the set is connected to TEL LINE correctly.
2. Listen for a CLICK sound when the OHD key is
pressed.
3. Check the connection of the HARNESS between
the LIU and the Main B'd.
4. Check that the SPEAKER is connected correctly.
1. If the telephone cord is OK but there is no dial tone, try
plugging a normal telephone into the wall socket. If this
is OK then replace the LIU B'd.
2. If you cannot hear the OHD CLICK sound, the OPE
Ass'y may be defective. Replace the OPE Ass'y.
(If the key click sound if off, you cannot hear click
sound even if OPE Ass’y has no problem on it)
3. Check the Speaker connection and the harness
between the LIU and the Main PBA, replace as
necessary.
4. Use Tech mode / Modem Test to check that the
speaker and amplifier are working. Replace the Main B'd.
6.6.2 Defective MF DIAL
• Description
The MF DIAL is not functioning.
Check and Cause Solution
1. Check that the telephone line cord supplied with
the set is connected to TEL LINE correctly.
2. Listen for a CLICK sound when the KEY is
pressed.
3. Check the connection of the HARNESS between
the LIU and the Main B'd.
4. Check that the SPEAKER is connected correctly.
1. If the telephone cord is OK but there is no dial tone, try
plugging a normal telephone into the wall socket. If this
is OK then replace the LIU B'd.
2. If you cannot hear the OHD CLICK sound, the OPE
Ass'y may be defective. Replace the OPE Ass'y.
(After key click sound sets to “ON”, and you can hear
click sound)
3. Check the Speaker connection and the harness
between the LIU and the Main PBA, replace as
necessary.
4. Use Tech mode / Modem Test to check that the
speaker and amplifier are working. Replace the LIU
and Main B'd in sequence
Notes: Product supports MF DIAL type only.
To Next Page
Loading...
