Basic setup_ 44
4. Click Advanced tab.
5. Select tray (source) and its options, such as paper size and type.
6. Press OK.
SETTING JOB TIMEOUT
When there is no input for a certain period of time, the machine exits the
current menu and goes in to the default settings. You can set the amount of
time the machine will wait.
1. Press Menu on the control panel.
2. Press the left/right arrow until System Setup appears and press OK.
3. Press the left/right arrow until Machine Setup appears and press OK.
4. Press the left/right arrow until Job Timeout appears and press OK.
5. Enter the time using left/right arrow or numeric keypad.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
