214
4. Special Features
Registering authorized users
If you have connected your machine to a network and set up the network
parameters correctly, you can scan and send images over the network. To send
a scanned image through email or via network server safely, you must register
account information of authorized users to your local machine using SyncThru™
Web Service.
1
Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 258).
2
Click Login on the upper right of the SyncThru™ Web Service website.
3
Type in the ID and Password then click Login.
• ID: admin
• Password: sec00000
4
Click Security > User Access Control > Authentication.
5
Select Local Authentication in the Authentication Method, and click
Apply.
6
Click OK in the confirmation pop-up window.
7
Click User Profile > Add.
8
Enter User Name, Login ID, Password, Confirm Password, E-mail
Address, and Fax Number.
You can easily add individual address if you check Yes for Add individual(s)
after this group is created.
9
Click Apply.
To Next Page
Loading...
