Service Manual
Alignment & Adjustments
6-24
Samsung Electronics
Registered
Meaning: The group dial location is already registered with another speed dial number.
Solution: Select another group dial location.
[Retry Redial?] (Only SCX-4720F)
Meaning: The multi-function printer is waiting for a specified time interval to redial a previously busy station.
Solution: You can press <Select>to immediately redial, or <Cancel>to cancel the redial operation.
[Toner Low]
Meaning: The toner is almost empty.
Solution: Take out the toner cartridge and gently shake it. By doing this, you can temporarily reestablish printing
operations.
Or Replace the toner cartridge with a new one for the best print quality.
Priority Fax Function Full (Only SCX-4720F)
Meaning: The priority fax job queue is full.
Solution: Cancel any unnecessary priority fax jobs.
[Incompatible] (Only SCX-4720F)
Meaning: The remote machine did not have the requested feature, such as a sending a color fax.
This message also occurs if the remote machine does not have enough memory space to complete the
operation you are attempting.
Solution: Reconfirm the remote machine’s features.
[Jam 1] or [No Cartridge]
Meaning: Paper has jammed in the paper exit area. Or, the toner cartridge is not installed.
Solution: Clear the jam. Or, install the toner cartridge.
[Line Busy] (Only SCX-4720F)
Meaning: The receiving party did not answer or the line is already engaged.
Solution: Try again after a few minutes.
Load Document
Meaning: You have attempted to set up a copy or fax operation with no document loaded into the ADF.
Solution: Load a document into the ADF and try again.
Scanner Locked
Meaning: The scanner module is locked
Solution: Unlock the scanner and press Stop/Clear.
[Stop Pressed]
Meaning: The Stop/Clear button has been pressed during a copy or fax operation.
Solution: Try again.
[Toner Empty] Replace Toner
Meaning: The toner cartridge has run out. The machine stops printing.
Solution: Replace the toner cartridge with a new one.
[Retry Redial?] (Only SCX-4720F)
Meaning: The machine is waiting for a specified time interval to redial a previously busy station.
Solution: You can press Enter to immediately redial, or Stop/Clear to cancel the redial operation.
To Next Page
Loading...
