Samsung SENS R60 Plus - Main Board Disassembly Steps

SENS R60 Plus < 3 - 12 >
3. Disassembling and Reassembling
Area Picture Description
Main
Board
1. Main Board
2. Remove 8 Screws for HeatSink separation.
-SpecialScrew:8EA
*Caution
HeatSink Screws couldn't be disassembled.
3. CPU & MDC part
4. Lift CPU by right angle after turn Screw to
direction such as the picture for CPU separation.
*Caution
Take care so that CPU Pin may not bend.
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -